Washer Repair Near You
Washer repair covers drain, spin and drum failures, from standing water in the tub to loads that stay soaked after a full cycle.

Updated
5a Electronic Services repairs washers across New York and nearby New Jersey towns, with a focus on drain, spin and drum problems that leave loads soaked or banging. We diagnose the pump, lid switch, belt or bearings in plain English, then fix it completely so laundry day runs normally again.
Get your appliance fixed
What do customers ask about Washer Repair?
Common questions and tips from our work with local customers.
When is the best time of year to repair a washing machine?
There is no off season for laundry, so the best time to fix a washer is as soon as the symptoms start. Slow draining or a weak spin in spring often becomes a dead machine in summer when households wash the most. Catching a worn drain pump or belt early usually means a simpler repair than waiting for the washer to stop mid-cycle with a tub full of water.
Why does my washer leave clothes soaking wet after the spin cycle?
Wet loads usually point to a drain or spin problem rather than the motor itself. Common causes are a clogged drain pump, a failed lid switch that stops the spin, a stretched belt, or an unbalanced load tripping the sensor. Most washers spin between 800 and 1,200 RPM, so when a cycle ends with clothes dripping, the machine never reached that speed and something in that chain needs attention.
Why does my washer bang loudly during the spin cycle?
Loads that bang and shake hard often come down to the drum side of the machine. A badly unbalanced load can do it, but so can worn shock absorbers, a tired drum bearing or a stuck suspension spring. Front loaders usually quiet down when the shocks are replaced, while a bearing that grinds when you turn the empty drum by hand needs attention before it seizes.
Can I fix a washer that will not drain myself?
You can safely check the simple things: clean the pump filter if your model has one, straighten kinked drain hoses, and make sure the load is not badly unbalanced. Beyond that, calling a professional matters. Drain pumps, lid switches and drive belts sit behind panels, and a wrong diagnosis can mean buying parts you do not need. We diagnose first, then repair only what failed.
Tip
Clear the area before the technician arrives
Before the visit, empty the washer and pull out any standing water you can reach with a towel or shallow container. Move laundry baskets and give the technician room to pull the machine forward a few inches, since drain pump and drum access often means working behind or beneath the unit. Knowing when the noise or leak started also helps narrow the diagnosis faster.
What are the key facts about Washer Repair?
Areas served
New York City, Brooklyn, Queens, Jersey City and nearby towns
Contact
(917) 436-6599
What does Washer Repair include?
- Drain pump testing and replacement for washers that will not empty
- Spin cycle repair for loads that come out wet
- Drum bearing, belt and roller inspection and repair
- Lid switch and balance sensor checks for shaking machines
- Leak inspection around the drum, hoses and pump housing
- Full test cycle after the repair to confirm the fix
Where is Washer Repair available?
We offer washer repair to customers across the region. Tap any area for full local details.
Where can I read more about Washer Repair?
What other services go with Washer Repair?
Email: aarontechrepair@gmail.com