Cooktop Repair Near You
Cooktop repair means diagnosing and fixing gas or electric cooktop problems like weak burners, faulty igniters and broken switches so you can cook at full heat again.

Updated
5a Electronic Services repairs gas and electric cooktops across New York City and nearby New Jersey towns, fixing igniters, burners, switches and cracked glass tops. A technician explains the problem in plain English, does the full repair on-site, and tests every burner before leaving your kitchen.
Get your appliance fixed
What do customers ask about Cooktop Repair?
Common questions and tips from our work with local customers.
How do I care for my cooktop after a repair?
Wipe spills while they are still warm but safe to touch, since burnt sugar and boiled-over sauce can pit a glass surface or clog a gas burner port. Use cooktop cleaner on glass tops, never abrasive pads. On gas models, keep burner caps seated straight; an off-center cap causes uneven flames. If a burner starts clicking again or heats unevenly weeks later, call us back.
How should I clean a gas cooktop without damaging the burners?
Lift the burner grates and wash them with dish soap and warm water, then dry them fully before putting them back. Clean the burner heads and caps gently so the small ports stay open; a clogged port means a weak or uneven flame. Skip oven cleaner and steel wool on the surface. Let everything dry completely before relighting, since trapped moisture keeps an igniter clicking.
Why does one burner on my cooktop flame too high or too low?
Flame size is controlled by a small adjustment screw on the valve behind each knob, and it can drift out of setting over years of use. A flame should burn steady and blue, reaching about the edge of the pot. If it roars with yellow tips or barely flickers on high, the valve setting or the regulator needs adjusting. That is a technician's job, because it involves the gas supply under the cooktop.
What should I check before calling about a dead electric burner?
Start with the easy ones. On a coil cooktop, unplug the burner, plug it back in firmly and test it in a different receptacle. If the burner works in the other spot, the receptacle has failed. If it stays cold in both, the element or the infinite switch behind the knob is likely done. Electric burners run on 240 volts, so leave any wiring test to a technician with the right meter.
Can I fix a clicking gas igniter myself?
Sometimes. If one burner clicks nonstop, check that the cap and burner head are seated flat and dry; a pot overflow can soak the igniter and cause constant sparking for an hour or so until it dries. If every burner clicks, or a burner still will not light when dry, the spark module or igniter likely needs replacing, and that is a job for a technician.
What are the key facts about Cooktop Repair?
Areas served
New York City and nearby northern New Jersey towns
Materials
Gas and electric cooktops, glass tops, igniters, elements, switches
Contact
(917) 436-6599
What does Cooktop Repair include?
- Gas igniter and spark module repair
- Electric burner and element replacement
- Infinite switch and control knob diagnostics
- Glass and porcelain cooktop surface replacement
- Gas flow and flame level adjustment
- Full burner-by-burner test after the fix
Where is Cooktop Repair available?
We offer cooktop repair to customers across the region. Tap any area for full local details.
What other services go with Cooktop Repair?
Email: aarontechrepair@gmail.com